-DSL - easy Display Setup for Laptops
-====================================
+LiLaSS - Linux Laptop Screen Setup
+==================================
Introduction
------------
-This is the documentation of DSL_, a tool to setup screens on a Linux-powered
+This is the documentation of LiLaSS_, a tool to setup screens on a Linux-powered
Laptop.
-DSL is targeted for a specific use-case: The laptop is used both with the
+LiLaSS is targeted for a specific use-case: The laptop is used both with the
internal screen only, and in combination with a single external screen.
xrandr_ is used to detect whether an external screen is plugged in, and
to change the configuration according to the user's specification.
-.. _DSL: https://www.ralfj.de/projects/dsl
+.. _LiLaSS: https://www.ralfj.de/projects/lilass
.. _xrandr: http://www.x.org/wiki/Projects/XRandR
Usage
-----
-DSL features an interactive and a batched mode of use.
-Either way, of DSL is started while no external screen is connected, it
-enables the internal screen. It also resets the backlight to 100%, as some
-laptops keep the backlight off if it was turned off by power-saving features.
+LiLaSS features an interactive and a batched mode of use.
+Either way, if LiLaSS is started while no external screen is connected, it
+enables the internal screen.
It is in the case that an external screen is plugged in that the two modes
differ.
-Simply run ``dsl.py`` to start the interactive mode. A window will pop up,
-allowing you to select the resolution of the external screen and where it
-will appear relative to the laptop. The option ``--frontend`` (or ``-f``) can
-be used to choose the frontend which opens the window. Currently, the
-frontends ``qt`` and ``zenity`` are available. DSL attempts to choose an
+Simply run ``lilass`` to start the interactive mode. A window will pop up,
+allowing you to select which screens are enabled, their resolution, and how they
+are positioned relatively to each other. The option ``--frontend`` (or ``-f``)
+can be used to choose the frontend which opens the window. Currently, the
+frontends ``qt`` and ``zenity`` are available. LiLaSS attempts to choose an
adequate frontend automatically.
-The option ``--relative-position`` (``-f``) suppresses the interactive
-configuration. Instead, the given given option (``left``, ``right`` or
-``external-only``) is applied with the default resolution of the external
+The option ``--relative-position`` (``-r``) suppresses the interactive
+configuration. Instead, the given given option (``left``, ``right``, ``above``,
+``below`` or ``mirror``) is applied with the default resolution of the external
screen.
-Finally, the flag ``--internal-only`` (``-i``) tells DSL to ignore the
-external screen and enable the internal one.
+Finally, the flags ``--internal-only`` (``-i``) and ``--external-only`` (``-e``)
+tells LiLaSS to use only one of the two screens.
+
+If the internal screen ends up being the only one that is used, LiLaSS attempts
+to turn on your backlight if it was disabled.
Automatic Configuration
-----------------------
-In combination with x-on-resize_ by Keith Peckard, DSL can automatically
+In combination with x-on-resize_ by Keith Peckard, LiLaSS can automatically
pop-up when a screen is plugged in, and automatically re-enable the internal
screen the external one is plugged off.
All this is achieved by running the following shell script on log-in::
- DSL=/path/to/dsl.py
- x-on-resize -c $DSL
- $DSL -r external-only
+ LILASS=/path/to/lilass
+ x-on-resize -c $LILASS
+ $LILASS --external-only
.. _x-on-resize: http://keithp.com/blogs/x-on-resize/
Configuration File
------------------
-You can use ``~/.dsl.conf`` to tell DSL which are the names of your internal
-and external connectors. These are the names as used by ``xrandr``.
-The option ``internalConnector`` gives the name of the xrandr connector
-corresponding to your internal laptop screen. All the others will be
-considered external screens, unless you use the option ``externalConnectors``
-to prove a (space-separated) list of connectors to be considered external by
-DSL. Any connector not mentioned in either option will be completely ignored.
+You can use ``~/.lilass.conf`` to tell LiLaSS which are the names of your
+internal and external connectors. These are the names as used by ``xrandr``. The
+option ``internalConnector`` gives the name of the xrandr connector
+corresponding to your internal laptop screen. All the others will be considered
+external screens, unless you use the option ``externalConnectors`` to prove a
+(space-separated) list of connectors to be considered external by LiLaSS. Any
+connector not mentioned in either option will be completely ignored.
Source, License
---------------
-You can find the sources in the `git repository`_. They are provided under
-the GPLv2_ or (at your option) any later version of the GPL.
+You can find the sources in the `git repository`_ and `on GitHub`_. They are
+provided under the GPLv2_ or (at your option) any later version of the GPL.
-.. _git repository: http://www.ralfj.de/git/dsl.git
+.. _git repository: http://www.ralfj.de/git/lilass.git
+.. _on GitHub: https://github.com/RalfJung/lilass
.. _GPLv2: https://www.gnu.org/licenses/old-licenses/gpl-2.0.html
Contact
-------
If you found a bug, or want to leave a comment, please
-`send me a mail <mailto:post-AT-ralfj-DOT-de>`_.
+`send me a mail <mailto:post-AT-ralfj-DOT-de>`_. I'm also happy about pull
+requests :)
projects / lilass.git / blobdiff