## Pointers Are Complicated
What is the problem with "pointers are just integers"? Let us consider the following example:<br>
-(I am using C++ code here mostly because writing unsafe code is easier in C++, and unsafe code is where these problems really show up.)
+(I am using C++ code here mostly because writing unsafe code is easier in C++, and unsafe code is where these problems really show up. C has all the same issues, as does unsafe Rust.)
{% highlight c++ %}
int test() {
auto x = new int[8];
I don't know the full answer to this.
In fact, this is an open area of research.
-Here's a simple proposal (in fact, this is the model used in my [RustBelt work]({{ site.baseurl }}{% post_url 2017-07-08-rustbelt %}), and it is also how [miri](https://github.com/solson/miri/) implements pointers):
+One important point to stress here is that we are just looking for an *abstract model* of the pointer.
+Of course, on the actual machine, pointers are integers.
+But the actual machine also does not do the kind of optimizations that modern C++ compilers do, so it can get away with that.
+If we wrote the above programs in assembly, there would be no UB, and no optimizations.
+C++ and Rust employ a more "high-level" view of memory and pointers, restricting the programmer for the benefit of optimizations.
+When formally describing what the programmer may and may not do in these languages, as we have seen, the model of pointers as integers falls apart, so we have to look for something else.
+This is another example of using a "virtual machine" that's different from the real machine for specification purposes, which is an idea [I have blogged about before]({{ site.baseurl }}{% post_url 2017-06-06-MIR-semantics %}).
+
+Here's a simple proposal (in fact, this is the model of pointers used in [CompCert](https://hal.inria.fr/hal-00703441/document) and my [RustBelt work]({{ site.baseurl }}{% post_url 2017-07-08-rustbelt %}), and it is also how [miri](https://github.com/solson/miri/) implements pointers):
A pointer is a pair of some kind of ID uniquely identifying the *allocation*, and an *offset* into the allocation.
Adding/subtracting an integer to/from a pointer just acts on the offset, and can thus never leave the allocation.
Subtracting a pointer from another is only allowed when both point to the same allocation (matching [C++](https://timsong-cpp.github.io/cppwp/n4140/expr.add#6)).[^2]
We always remember which allocation a pointer points to, so we can differentiate a pointer "one past the end" of one allocation from a pointer to the beginning of another allocation.
That's how miri can detect that our second example (with `&x[8]`) is UB.
+## The Model Falls Apart
+
In this model, pointers are not integers, but they are at least simple.
However, this simple model starts to fall apart once you consider pointer-integer casts.
-In miri, casting a pointer to an integer does not actually do anything, we now just have an integer variable whose value is a pointer (i.e., an allocation-offset pair).
-Multiplying that integer by 2 leads to an error, because it is entirely unclear what it means to multiply such a pair by 2.
+In miri, casting a pointer to an integer does not actually do anything, we now just have an integer variable (i.e., its *type* says it is an integer) whose *value* is a pointer (i.e., an allocation-offset pair).
+However, multiplying that "integer" by 2 leads to an error, because it is entirely unclear what it means to multiply such an abstract pointer by 2.
+
+This is the most lazy thing to do, and we do it because it is not clear what else to do (other than not supporting these casts at all -- but this way, miri can run more programs).
+In our abstract machine, there is no single coherent "address space" that all allocations live in, that we could use to map every pointer to a distinct integer.
+Every allocation is just identified by an (unobservable) ID.
+We could now start to enrich this model with extra data like a base address for each allocation, and somehow use that when casting an integer back to a pointer... but that's where it gets really complicated, and anyway discussing such a model is not the point of this post.
+The point it to discuss the *need* for such a model.
+If you are interested, I suggest you read [this paper](http://www.cis.upenn.edu/%7Estevez/papers/KHM+15.pdf) that explores the above idea of adding a base address.
+
+Long story short, pointer-integer casts are messy and hard to define formally when also considering optimizations like we discussed above.
+There is a conflict between the high-level view that is required to enable optimizations, and the low-level view that is required to explain casting a pointer to an integer and back.
+We mostly just ignore the problem in miri and opportunistically do as much as we can, given the simple model we are working with.
A full definition of a language like C++ or Rust of course cannot take this shortcut, it has to explain what really happens here.
-To my knowledge, no satisfying solution exists, but we are [getting](http://www.cis.upenn.edu/%7Estevez/papers/KHM+15.pdf) [closer](http://sf.snu.ac.kr/publications/llvmtwin.pdf).
+To my knowledge, no satisfying solution exists, but academic research is [getting closer](http://sf.snu.ac.kr/publications/llvmtwin.pdf).
+
This is why pointers are not simple, either.
## From Pointers to Bytes
I hope I made a convincing argument that integers are not the only data one has to consider when formally specifying low-level languages such as C++ or (the unsafe parts of) Rust.
However, this means that a simple operation like loading a byte from memory cannot just return a `u8`.
+Imagine we [implement `memcpy`](https://github.com/alexcrichton/rlibc/blob/defb486e765846417a8e73329e8c5196f1dca49a/src/lib.rs#L39) by loading (in turn) every byte of the source into some local variable `v`, and then storing it to the target.
What if that byte is part of a pointer? When a pointer is a pair of allocation and offset, what is its first byte?
-We cannot represent this as a `u8`.
+We have to say what the value of `v` is, so we have to find some way to answer this question.
+(And this is an entirely separate issue from the problem with multiplication that came up in the last section. We just assume some abstract type `Pointer`.)
+
+We cannot represent a byte of a pointer as an element of `0..256`.
Instead, we will remember both the pointer, and which byte of the pointer we got.
+So, a byte is now *either* an element of `0..256` ("raw bits"), *or* the n-th byte of some abstract pointer.
If we were to implement our memory model in Rust, this might look as follows:
{% highlight rust %}
enum ByteV1 {
}
{% endhighlight %}
For example, a `PtrFragment(ptr, 0)` represents the first byte of `ptr`.
-This way, we can "take apart" a pointer into the individual bytes that represent this pointer in memory, and assemble it back together.
+This way, `memcpy` can "take apart" a pointer into the individual bytes that represent this pointer in memory, and copy them separately.
On a 32bit architecture, the full value representing `ptr` consists of the following 4 bytes:
```
[PtrFragment(ptr, 0), PtrFragment(ptr, 1), PtrFragment(ptr, 2), PtrFragment(ptr, 3)]
```
-Such a representation supports performing all byte-level "data moving" operations on pointers, like implementing `memcpy` by copying one byte at a time.
+Such a representation supports performing all byte-level "data moving" operations on pointers, which is sufficient for `memcpy`.
Arithmetic or bit-level operations are not fully supported; as already mentioned above, that requires a more sophisticated pointer representation.
## Uninitialized Memory
## Conclusion
-We have seen that pointers can be different even when they point to the same address, and that a byte is more than just a number in `0..256`.[^4]
+We have seen that in languages like C++ and Rust (unlike on real hardware), pointers can be different even when they point to the same address, and that a byte is more than just a number in `0..256`.
+This is also why calling C "portable assembly" may have been appropriate in 1978, but is a dangerously misleading statement nowadays.
With this, I think we are ready to look at a first draft of my "2018 memory model" (working title ;) -- in the next post. :)
+Thanks to @rkruppe and @nagisa for help in finding arguments for why `Uninit` is needed.
If you have any questions, feel free to [ask in the forums](https://internals.rust-lang.org/t/pointers-are-complicated-or-whats-in-a-byte/8045)!
-[^4]: And just to be clear, I am talking about a pointer or byte in the model of an optimized *programming language* here. When modeling hardware, everything is different.
-
#### Footnotes
projects / web.git / blobdiff