X-Git-Url: https://git.ralfj.de/rust-101.git/blobdiff_plain/188b1ec1b8528e2326791feccc8077e15bd60182..801f2b59728fba1e13d3e34a08457b812f8c0f56:/src/part15.rs?ds=sidebyside diff --git a/src/part15.rs b/src/part15.rs index a783689..e646d34 100644 --- a/src/part15.rs +++ b/src/part15.rs @@ -1,28 +1,39 @@ -// Rust-101, Part 15: Mutex, Interior Mutability (cont.), Sync -// =========================================================== +// Rust-101, Part 15: Mutex, Interior Mutability (cont.), RwLock, Sync +// =================================================================== use std::sync::{Arc, Mutex}; use std::thread; - -//@ We already saw that we can use `Arc` to share memory between threads. However, `Arc` can only provide *read-only* -//@ access to memory: Since there is aliasing, Rust cannot, in general, permit mutation. If however, -//@ some care would be taken at run-time, then mutation would still be all right: We have to ensure that whenever -//@ someone changes the data, nobody else is looking at it. In other words, we need a *critical section* or (as it -//@ is called in Rust) a [`Mutex`](http://doc.rust-lang.org/stable/std/sync/struct.Mutex.html). Some other languages also call this a *lock*. +use std::time::Duration; + +//@ We already saw that we can use `Arc` to share memory between threads. However, `Arc` can only +//@ provide *read-only* access to memory: Since there is aliasing, Rust cannot, in general, permit +//@ mutation. To implement shared-memory concurrency, we need to have aliasing and permutation - +//@ following, of course, some strict rules to make sure there are no data races. In Rust, shared- +//@ memory concurrency is obtained through *interior mutability*, which we already discussed in a +//@ single-threaded context in part 12. //@ -//@ As an example, let us write a concurrent counter. As usual in Rust, we first have to think about our data layout. -//@ In case of the mutex, this means we have to declare the type of the data that we want to be protected. In Rust, -//@ a `Mutex` protects data, not code - and it is impossible to access the data in any other way. This is generally considered -//@ good style, but other languages typically lack the ability to actually enforce this. -//@ Of course, we want multiple threads to have access to this `Mutex`, so we wrap it in an `Arc`. +//@ ## `Mutex` +//@ The most basic type for interior mutability that supports concurrency is +//@ [`Mutex`](https://doc.rust-lang.org/stable/std/sync/struct.Mutex.html). +//@ This type implements *critical sections* (or *locks*), but in a data-driven way: One has to +//@ specify the type of the data that's protected by the mutex, and Rust ensures that the data is +//@ *only* accessed through the mutex. In other words, "lock data, not code" is actually enforced +//@ by the type system, which becomes possible because of the discipline of ownership and +//@ borrowing. //@ -//@ Rather than giving every field a name, a struct can also be defined by just giving a sequence of types (similar -//@ to how a variant of an `enum` is defined). This is called a *tuple struct*. It is often used when constructing -//@ a *newtype*, as we do here: `ConcurrentCounter` is essentially just a new name for `Arc>`. However, -//@ is is a locally declared types, so we can give it an inherent implementation and implement traits for it. Since the -//@ field is private, nobody outside this module can even know the type we are wrapping. - -// The derived `Clone` implementation will clone the `Arc`, so all clones will actually talk about the same counter. +//@ As an example, let us write a concurrent counter. As usual in Rust, we first have to think +//@ about our data layout: That will be `Mutex`. Of course, we want multiple threads to have +//@ access to this `Mutex`, so we wrap it in an `Arc`. +//@ +//@ Rather than giving every field a name, a struct can also be defined by just giving a sequence +//@ of types (similar to how a variant of an `enum` is defined). This is called a *tuple struct*. +//@ It is often used when constructing a *newtype*, as we do here: `ConcurrentCounter` is +//@ essentially just a new name for `Arc>`. However, is is a locally declared types, +//@ so we can give it an inherent implementation and implement traits for it. Since the field is +//@ private, nobody outside this module can even know the type we are wrapping. + +// The derived `Clone` implementation will clone the `Arc`, so all clones will actually talk about +// the same counter. #[derive(Clone)] struct ConcurrentCounter(Arc>); @@ -32,37 +43,27 @@ impl ConcurrentCounter { ConcurrentCounter(Arc::new(Mutex::new(val))) /*@*/ } - //@ The core operation is, of course, `increment`. The type may be surprising at first: A shared borrow? - //@ How can this be, since `increment` definitely modifies the counter? We already discussed above that `Mutex` is - //@ a way to get around this restriction in Rust. This phenomenon of data that can be mutated through a shared - //@ borrow is called *interior mutability*: We are changing the inner parts of the object, but seen from the outside, - //@ this does not count as "mutation". This stands in contrast to *exterior mutability*, which is the kind of - //@ mutability we saw so far, where one piece of data is replaced by something else of the same type. If you are familiar - //@ with languages like ML, you can compare this to how something of type `ref` permits mutation, even though it is - //@ itself a functional value (more precisely, a location) like all the others. - //@ - //@ Interior mutability breaks the rules of Rust that I outlined earlier: There is aliasing (a shared borrow) and mutation. - //@ The reason that this still works is careful programming of the primitives for interior mutability - in this case, that's - //@ `Mutex`. It has to ensure with dynamic checks, at run-time, that things don't fall apart. In particular, it has to ensure - //@ that the data covered by the mutex can only ever be accessed from inside a critical section. This is where Rust's type - //@ system comes into play: With its discipline of ownership and borrowing, it can enforce such rules. Let's see how this goes. + // The core operation is, of course, `increment`. pub fn increment(&self, by: usize) { - // `lock` on a mutex returns a *guard*, giving access to the data contained in the mutex. - //@ (We will discuss the `unwrap` soon.) `.0` is how we access the first component of a tuple or a struct. + // `lock` on a mutex returns a guard, very much like `RefCell`. The guard gives access to + // the data contained in the mutex. + //@ (We will discuss the `unwrap` soon.) `.0` is how we access the first component of a + //@ tuple or a struct. let mut counter = self.0.lock().unwrap(); - //@ The guard is another example of a smart pointer, and it can be used as if it were a pointer to the data protected - //@ by the lock. + //@ The guard is a smart pointer to the content. *counter = *counter + by; //@ At the end of the function, `counter` is dropped and the mutex is available again. - //@ This can only happen when full ownership of the guard is given up. In particular, it is impossible for us - //@ to borrow some of its content, release the lock of the mutex, and subsequently access the protected data without holding - //@ the lock. Enforcing the locking discipline is expressible in the Rust type system, so we don't have to worry - //@ about data races *even though* we are mutating shared memory! + //@ This can only happen when full ownership of the guard is given up. In particular, it is + //@ impossible for us to take a reference to some of its content, release the lock of the + //@ mutex, and subsequently access the protected data without holding the lock. Enforcing + //@ the locking discipline is expressible in the Rust type system, so we don't have to + //@ worry about data races *even though* we are mutating shared memory! //@ - //@ One of the subtle aspects of locking is *poisoning*. If a thread panics while it holds a lock, it could leave the - //@ data-structure in a bad state. The lock is hence considered *poisoned*. Future attempts to `lock` it will fail. - //@ Above, we simply assert via `unwrap` that this will never happen. Alternatively, we could have a look at the poisoned - //@ state and attempt to recover from it. + //@ One of the subtle aspects of locking is *poisoning*. If a thread panics while it holds + //@ a lock, it could leave the data-structure in a bad state. The lock is hence considered + //@ *poisoned*. Future attempts to `lock` it will fail. + //@ Above, we simply assert via `unwrap` that this will never happen. Alternatively, we + //@ could have a look at the poisoned state and attempt to recover from it. } // The function `get` returns the current value of the counter. @@ -80,7 +81,7 @@ pub fn main() { let counter1 = counter.clone(); let handle1 = thread::spawn(move || { for _ in 0..10 { - thread::sleep_ms(15); + thread::sleep(Duration::from_millis(15)); counter1.increment(2); } }); @@ -89,78 +90,85 @@ pub fn main() { let counter2 = counter.clone(); let handle2 = thread::spawn(move || { for _ in 0..10 { - thread::sleep_ms(20); + thread::sleep(Duration::from_millis(20)); counter2.increment(3); } }); // Now we watch the threads working on the counter. for _ in 0..50 { - thread::sleep_ms(5); + thread::sleep(Duration::from_millis(5)); println!("Current value: {}", counter.get()); } - // Finally, we wait for all the threads to finish to be sure we can catch the counter's final value. + // Finally, we wait for all the threads to finish to be sure we can catch the counter's final + // value. handle1.join().unwrap(); handle2.join().unwrap(); println!("Final value: {}", counter.get()); } -// **Exercise 14.1**: Besides `Mutex`, there's also [`RwLock`](http://doc.rust-lang.org/stable/std/sync/struct.RwLock.html), which -// provides two ways of locking: One that grants only read-only access, to any number of concurrent readers, and another one -// for exclusive write access. (Notice that this is the same pattern we already saw with shared vs. mutable borrows.) Change -// the code above to use `RwLock`, such that multiple calls to `get` can be executed at the same time. +// **Exercise 15.1**: Add an operation `compare_and_inc(&self, test: usize, by: usize)` that +// increments the counter by `by` *only if* the current value is `test`. // -// **Exercise 14.2**: Add an operation `compare_and_inc(&self, test: usize, by: usize)` that increments the counter by -// `by` *only if* the current value is `test`. - -//@ ## Sync -//@ In part 12, we talked about types that are marked `Send` and thus can be moved to another thread. However, we did *not* -//@ talk about the question whether a borrow is `Send`. For `&mut T`, the answer is: It is `Send` whenever `T` is send. -//@ `&mut` allows moving values back and forth, it is even possible to [`swap`](http://doc.rust-lang.org/beta/std/mem/fn.swap.html) -//@ the contents of two mutably borrowed values. So in terms of concurrency, sending a mutable borrow is very much like -//@ sending full ownership, in the sense that it can be used to move the object to another thread. +// **Exercise 15.2**: Rather than panicking in case the lock is poisoned, we can use `into_inner` +// on the error to recover the data inside the lock. Change the code above to do that. Try using +// `unwrap_or_else` for this job. + +//@ ## `RwLock` +//@ Besides `Mutex`, there's also +//@ [`RwLock`](https://doc.rust-lang.org/stable/std/sync/struct.RwLock.html), which provides two +//@ ways of locking: One that grants only read-only access, to any number of concurrent readers, +//@ and another one for exclusive write access. Notice that this is the same pattern we already +//@ saw with shared vs. mutable references. Hence another way of explaining `RwLock` is to say that +//@ it is like `RefCell`, but works even for concurrent access. Rather than panicking when the data +//@ is already borrowed, `RwLock` will of course block the current thread until the lock is +//@ available. In this view, `Mutex` is a stripped-down version of `RwLock` that does not +//@ distinguish readers and writers. + +// **Exercise 15.3**: Change the code above to use `RwLock`, such that multiple calls to `get` can +// be executed at the same time. + +//@ ## `Sync` +//@ Clearly, if we had used `RefCell` rather than `Mutex`, the code above could not work: `RefCell` +//@ is not prepared for multiple threads trying to access the data at the same time. How does Rust +//@ make sure that we don't accidentally use `RefCell` across multiple threads? //@ -//@ But what about `&T`, a shared borrow? Without interior mutability, it would always be all-right to send such values. -//@ After all, no mutation can be performed, so there can be as many threads accessing the data as we like. In the -//@ presence of interior mutability though, the story gets more complicated. Rust introduces another marker trait for -//@ this purpose: `Sync`. A type `T` is `Sync` if `&T` is `Send`. Just like `Send`, `Sync` has a default implementation -//@ and is thus automatically implemented for a data-structure *if* all its members implement it. +//@ In part 13, we talked about types that are marked `Send` and thus can be moved to another +//@ thread. However, we did *not* talk about the question whether a reference is `Send`. For `&mut +//@ T`, the answer is: It is `Send` whenever `T` is send. +//@ `&mut` allows moving values back and forth, it is even possible to +//@ [`swap`](https://doc.rust-lang.org/stable/std/mem/fn.swap.html) the contents of two mutable +//@ references. So in terms of concurrency, sending a mutable, unique reference is very much like +//@ sending full ownership, in the sense that it can be used to move the object to another thread. //@ -//@ Almost all the types we saw so far are `Sync`, with the exception of `Rc`. Remember that a shared borrow is good enough -//@ for cloning, and we don't want other threads to clone our local `Rc`, so it must not be `Sync`. The rule of `Mutex` -//@ is to enforce synchronization, so it should not be entirely surprising that `Mutex` is `Send` *and* `Sync` provided that -//@ `T` is `Send`. +//@ But what about `&T`, a shared reference? Without interior mutability, it would always be all- +//@ right to send such values. After all, no mutation can be performed, so there can be as many +//@ threads accessing the data as we like. In the presence of interior mutability though, the story +//@ gets more complicated. Rust introduces another marker trait for this purpose: `Sync`. A type +//@ `T` is `Sync` if and only if `&T` is `Send`. Just like `Send`, `Sync` has a default +//@ implementation and is thus automatically implemented for a data-structure *if* all its members +//@ implement it. //@ -//@ In the next part, we will learn about a type called `RefCell` that is `Send`, but not `Sync`. +//@ Since `Arc` provides multiple threads with a shared reference to its content, `Arc` is only +//@ `Send` if `T` is `Sync`. So if we had used `RefCell` above, which is *not* `Sync`, Rust would +//@ have caught that mistake. Notice however that `RefCell` *is* `Send`: If ownership of the entire +//@ cell is moved to another thread, it is still not possible for several threads to try to access +//@ the data at the same time. //@ -//@ You may be curious whether there is a type that's `Sync`, but not `Send`. There are indeed rather esoteric examples -//@ of such types, but that's not a topic I want to go into. In case you are curious, there's a -//@ [Rust RFC](https://github.com/rust-lang/rfcs/blob/master/text/0458-send-improvements.md), which contains a type `RcMut` that would be `Sync` and not `Send`. -//@ You may also be interested in [this blog post](https://huonw.github.io/blog/2015/02/some-notes-on-send-and-sync/) on the topic. - -// FIXME TODO some old outdated explanation FIXME TODO - -//@ [`RefCell`](http://doc.rust-lang.org/beta/std/cell/struct.RefCell.html) -//@ [`is very much like `RwLock`, but it's not thread-safe: "Locking" is done without atomic operations. -//@ One can also see it as a dynamically checked version of Rust's usual borrowing rules. You have to explicitly say -//@ when you want to borrow the data in there shared, or mutably, and Rust will complain at run-time if you have -//@ a mutable borrow while any other borrow is active. You can then write programs that Rust may otherwise not -//@ accept. Sending a shared borrow to this to another thread is dangerous, as the checks are not performed in -//@ a thread-safe manner. However, sending the *entire* `RefCell` is okay, because there's only ever one owner, and all -//@ we need to ensure is that everybody attempting to borrow is in the same thread as the owner.
-//@ [`Cell`](http://doc.rust-lang.org/beta/std/cell/struct.Cell.html) is like a stripped-down version of `RefCell`: It doesn't allow -//@ you to borrow its content. Instead, it has a methods `get` and `set` to change the value stored in the cell, and to copy it out. -//@ For obvious reasons, this requires `T` to be `Copy`. +//@ Almost all the types we saw so far are `Sync`, with the exception of `Rc`. Remember that a +//@ shared reference is good enough for cloning, and we don't want other threads to clone our local +//@ `Rc` (they would race for updating the reference count), so it must not be `Sync`. The rule of +//@ `Mutex` is to enforce synchronization, so it should not be entirely surprising that `Mutex` +//@ is `Send` *and* `Sync` provided that `T` is `Send`. //@ -//@ You can also think about all these types coming from the other end: Starting with `Cell`, we have a primitive for -//@ interior mutability that provides `get` and `set`, both just requiring a shared borrow. Think of these functions as -//@ mutating the *content* of the cell, but not the cell itself, the container. (Just like in ML, where assignment to a -//@ `ref` changes the content, not the location.) However, due to the ownership discipline, `Cell` only works for types -//@ that are `Copy`. Hence we also have `RefCell`, which allows working with the data right in the cell, rather than -//@ having to copy it out. `RefCell` uses non-atomic operations for this purpose, so for the multi-threaded setting, there's -//@ the thread-safe `RwLock`. And finally, in case a distinction between readers and writers is not helpful, one can use the -//@ more efficient `Mutex`. - - -//@ [index](main.html) | [previous](part14.html) | [next](main.html) +//@ You may be curious whether there is a type that's `Sync`, but not `Send`. There are indeed +//@ rather esoteric examples of such types, but that's not a topic I want to go into. In case you +//@ are curious, there's a +//@ [Rust RFC](https://github.com/rust-lang/rfcs/blob/master/text/0458-send-//@ improvements.md), +//@ which contains a type `RcMut` that would be `Sync` and not `Send`. +//@ You may also be interested in this +//@ [blog post](https://huonw.github.io/blog/2015/02/some-notes-on-send-and-sync/) on the topic. + +//@ [index](main.html) | [previous](part14.html) | [raw source](workspace/src/part15.rs) | +//@ [next](part16.html)